The M8 Game Stick Lite turns a TV, projector or monitor into a retro game console for two. Start with the connection checklist below and the instructions supplied with your unit. Here's how to connect it and what to do if something doesn't work.
What's in the box
- Game stick with a 64GB card
- Two 2.4G wireless controllers
- USB wireless receiver
- HDMI extension cable
- USB power cable
Controller batteries and a wall adapter are not included. A standard 5V USB wall adapter is the usual choice.
Quick connection checklist
| Connection | Check |
|---|---|
| HDMI input | The TV is set to the same HDMI port as the stick. |
| USB power | The power cable is connected to a supply that meets the unit's instructions. |
| Wireless receiver | The supplied receiver is connected to the game stick. |
| Controllers | Check the required batteries, power switches and pairing instructions. |
| Two-player mode | Use a game and mode that actually support two players. |
Change one connection at a time so you can identify what fixed the problem. Take a photo of the stick, receiver and power connection when asking support for help.
Connect it
- Plug the stick into a free HDMI port on your TV. If the port is hard to reach or crowded by other cables, use the HDMI extension cable.
- Plug the USB wireless receiver into the stick.
- Connect the USB power cable to the stick and to a power source.
- Switch your TV to the HDMI input you used.
- Put batteries in both controllers and switch them on.
Pair the controllers
The controllers connect to the receiver when they're switched on near the stick. If a controller doesn't respond, switch it off and on again while holding it close to the TV. The guide that comes with the stick shows the exact steps for your batch. With both controllers connected, choose a game and mode that support two players.
Troubleshooting
No signal on the TV
- Check that the TV is set to the right HDMI input.
- Unplug the stick and plug it back in firmly, or try another HDMI port.
- Make sure the power cable is connected and the power source is on.
The stick restarts or the picture drops out
Insufficient or unstable power is one possible cause. Check the supply requirements in the manual and try a compatible power source and cable. An HDMI connection does not replace the separate power connection.
A controller doesn't respond
- Replace the batteries.
- Check that the receiver is plugged into the stick.
- Move closer to the TV and make sure nothing is blocking the receiver.
A game won't start or runs slowly
The M8 covers systems up to PS1, so games from later 3D consoles aren't supported. If one game won't start but others do, try another title. Not every included game runs perfectly. For a different listed emulator range, compare the X2 Plus, while checking game-specific performance rather than assuming every title will run well.
Saving your progress
The M8 supports saving and resuming games, search and favorites. If you're not sure how to open the save menu on your stick, email us and we'll walk you through it.
Need help?
Email support@retroorbitgames.com with your order number and a photo of what you see on the TV. We reply within one business day, Monday to Friday.
See the M8 Game Stick Lite or all TV consoles.